A Terahertz Video Camera Patch Sheet with an Adjustable Design based on Self-Aligned, 2D,Suspended Sensor Array Patterning

Terahertz (THz) imaging is expected to become powerful tools for non-destructive inspections. To ensure the practical use of THz non-destructive monitoring, versatile THz imagers with adjustable designs that can eliminate the complexities and the bulkiness of the device are urgently required. Herein, a self-aligned filtration process for a 2D, free-standing carbon nanotube film array and its application to a THz video camera patch are reported. The presented techniques enable a) to freely design the camera size, sensor array pattern, and suspended shape according to its applications, b) to cut the camera patch into desired shapes, and c) to attach them to the objects that are intended to be measured. Real-time, non-destructive monitoring of various infrastructures is demonstrated. These results indicate that it can function regardless of restrictions, such as the shapes and locations of the measurement samples, thus providing a strong possibility for use in future non-destructive sensor networks.     

Microtopography‐Guided Radial Gradient Circle Array Film with Nanoscale Resolution

Distribution of multimaterials at arbitrary positions with nanoscale resolution and over a large area substrate is essential to future advances in functional graded materials. Such stringent requirements are highly beyond the reach of current techniques, although newly developed 3D printing technologies are addressed. Here, a radial gradient circle array film with the distribution accuracy up to ≈18 nm is fabricated by using microtopographic substrate. A mathematical model is developed to guide the distribution of position, size, shape, and type of materials on an arbitrary section for the given morphology of substrate. The periodic electrical and mechanical properties of the radial gradient circle film are identified, which can be beneficial for further functionalization and applications, such as gradient refractive index lenses, microcoils, and microantennas.     

基于蛾眼阵列的全向宽光谱减反层优化设计

为降低太阳电池封装材料PET薄膜的反射率,采用严格耦合波分析(RCWA)方法对基于蛾眼阵列的减反层进行了优化设计。对比研究了圆锥形、抛物线形和正弦形蛾眼结构的减反性能,结果表明圆锥形蛾眼结构具有最佳全向宽光谱减反性能。分析了圆锥体几何参数对太阳光透过率的影响,为参数选取提供依据。在此基础上,提出基于柱形与锥形复合结构的蛾眼阵列,通过参数优化,进一步提高了太阳光在大角度入射条件下的透过率。优化后复合结构的蛾眼阵列的PET薄膜对波长范围在0.3~1.1μm、入射角度为0°~90°的入射太阳光角度归一化透过率达到0.966 4,相比于未采取减反措施的PET薄膜透过率提高12.77%。     

In Silico Study on Tumor-Size-Dependent Thermal Profiles inside an Anthropomorphic Female Breast Phantom Subjected to Multi-Dipole Antenna Array

Electromagnetic hyperthermia as a potent adjuvant for conventional cancer therapies can be considered valuable in modern oncology, as its task is to thermally destroy cancer cells exposed to high-frequency electromagnetic fields. Hyperthermia treatment planning based on computer in silico simulations has the potential to improve the localized heating of breast tissues through the use of the phased-array dipole applicators. Herein, we intended to improve our understanding of temperature estimation in an anatomically accurate female breast phantom embedded with a tumor, particularly when it is exposed to an eight-element dipole antenna matrix surrounding the breast tissues. The Maxwell equations coupled with the modified Pennes’ bioheat equation was solved in the modelled breast tissues using the finite-difference time-domain (FDTD) engine. The microwave (MW) applicators around the object were modelled with shortened half-wavelength dipole antennas operating at the same 1 GHz frequency, but with different input power and phases for the dipole sources. The total input power of an eight-dipole antenna matrix was set at 8 W so that the temperature in the breast tumor did not exceed 42 °C. Finding the optimal setting for each dipole antenna from the matrix was our primary objective. Such a procedure should form the basis of any successful hyperthermia treatment planning. We applied the algorithm of multi for multi-objective optimization for the power and phases for the dipole sources in terms of maximizing the specific absorption rate (SAR) parameter inside the breast tumor while minimizing this parameter in the healthy tissues. Electro-thermal simulations were performed for tumors of different radii to confirm the reliable operation of the given optimization procedure. In the next step, thermal profiles for tumors of various sizes were calculated for the optimal parameters of dipole sources. The computed results showed that larger tumors heated better than smaller tumors; however, the procedure worked well regardless of the tumor size. This verifies the effectiveness of the applied optimization method, regardless of the various stages of breast tumor development.     

γ-γ符合测量系统的新型前端读出电路研制

研制了一种新型前端读出电路，用于重离子治癌装置中符合测量原型系统的研究和测试。电路主要包括能量链、时间链和数据处理单元。能量链由截止频率7 MHz的抗混叠滤波器和模数转换器(ADC)组成，形成波形采样电路；时间链由高速比较器构成的定时甄别电路和时间数字转换器（TDC）组成；数据处理单元基于现场可编程门阵列(FPGA)设计实现。电路的线性度优于0.8%，噪声小于0.8 mV（RMS）。配合LaBr3单晶体条测试，能量分辨为4.5%（FWHM），在与LYSO晶体阵列配合测试时，位置映射散点图清晰。该前端读出电路性能优于CAMAC系统，具有较好的实际应用前景。     

Off‐grid DoA estimation method of wideband signals

In this paper, an off‐grid direction of arrival (DoA) estimation method is proposed for wideband signals. This method is based on the sparse representation (SR) of the array covariance matrix. Similar to the time domain DoA estimation methods, the correlation function of the sources was assumed to be the same and known. A new measurement vector is obtained using the lower‐left triangular elements of the covariance matrix. The DoAs are estimated by quantizing the entire range of continuous angle space into discrete grid points. However, the exact DoAs may be located between two grid points; therefore, this estimation has errors. The accuracy of DoA estimation is improved by the minimization of the difference between the new measurement vector and its estimated values. Simulation results revealed that the proposed method can enhance the DoA estimation accuracy of wideband signals.     

NiFe2O4–Ni3S2 nanorod array/Ni foam composite catalyst indirectly controlled by Fe3+ immersion for an efficient oxygen evolution reaction

A NiFe alloy was designed on nickel foam (NF) as a precursor using cathodic electrodeposition. NiFe₂O₄–Ni₃S₂ nanorods (NRs) composite catalysts were prepared by Fe³⁺ impregnation and further hydrothermal sulfuration methods. NiFe₂O₄–Ni₃S₂ nanosheets (NSs) were also prepared by direct hydrothermal sulfuration of the NiFe alloy for comparison. Compared to the dense NS structure of the NiFe₂O₄–Ni₃S₂ NSs/NF, the NiFe₂O₄–Ni₃S₂ NRs/NF showed better oxygen evolution performance due to its unique weed-like NR array structure composed of additional oxygen evolution reaction (OER) active sites, with a strong electron interaction for Ni and Fe and the active sulfide synergistic effect with oxides. Therefore, Driving a current density of 10 mA cm^?2 only requires an overpotential of 189 mV and the catalyst could provide 100 mA cm^?2 continuously and be constant for more than 80 h in 1.0 M KOH. This experiment indicated that Fe³⁺ immersion had an indirect regulating effect on the morphological growth of the catalyst, which provided a novel concept for designing better OER catalysts.     

基于光储频的超宽带相控阵干扰系统设计

瞄准现代化信息战争中有源电子干扰超宽带、大功率、多目标作战能力需求,将超宽带光储频技术与有源相控阵相技术相结合,构建并设计了一套基于光储频的超宽带相控阵干扰系统。基于光延时网络结合波分复用技术实现超宽带光储频,并通过实时时间延时技术实现超宽带有源相控阵发射多波束合成。系统具有大有效辐射功率发射、同时多波束发射以及超宽带瞬时干扰特性,有效解决了传统数字储频、非功率合成体制有源电子干扰系统有效辐射功率小、多波束能力不足、干扰带宽受限等问题。     

Remarkable enhancement of the photocatalytic activity of ZnO nanorod array by utilizing energy transfer between Eosin Y and Rose Bengal for visible light-driven hydrogen evolution

In this work, we suggested that an efficient ZnO-based photocatalyst can be prepared utilizing energy transfer among organic dyes for visible light-driven hydrogen evolution. Followed this idea, a photocatalytic system containing Eosin Y, Rose Bengal, ZnO nanorod array and Pt was fabricated. Meanwhile, photocatalytic H₂ evolution over the as-prepared photocatalytic system was explored. The results indicate that the visible photocatalytic activity of ZnO nanorod array can be obviously enhanced utilizing the energy transfer between Eosin Y and Rose Bengal. This photocatalytic system possesses high activity for visible light-driven H₂ evolution. A rate of H₂ evolution of approximate 0.52 L m^?2 h^?1 was achieved under optimal condition, which is 130% and 58% higher than those of the photocatalytic systems containing individual dye, respectively. The present results may reveal a new strategy for preparation of efficient visible photocatalyst.     

Compiler compatible 5.66 Mb/mm2 8T 1R1W register file in 14 nm FinFET technology

1-read/1-write (1R1W) register file (RF) is a popular memory configuration in modern feature rich SoCs requiring significant amount of embedded memory. A memory compiler is constructed using the 8T RF bitcell spanning a range of instances from 32 b to 72 Kb. An 8T low-leakage bitcell of 0.106 μm² is used in a 14 nm FinFET technology with a 70 nm contacted gate pitch for high-density (HD) two-port (TP) RF memory compiler which achieves 5.66 Mb/mm² array density for a 72 Kb array which is the highest reported density in 14 nm FinFET technology. The density improvement is achieved by using techniques such as leaf-cell optimization (eliminating transistors), better architectural planning, top level connectivity through leaf-cell abutment and minimizing the number of unique leaf-cells. These techniques are fully compatible with memory compiler usage over the required span. Leakage power is minimized by using power-switches without degrading the density mentioned above. Self-induced supply voltage collapse technique is applied for write and a four stack static keeper is used for read Vmin improvement. Fabricated test chips using 14 nm process have demonstrated 2.33 GHz performance at 1.1 V/25 °C operation. Overall V_min of 550 mV is achieved with this design at 25 °C. The inbuilt power-switch improves leakage power by 12x in simulation. Approximately 8% die area of a leading 14 nm SoC in commercialization is occupied by these compiled RF instances.